All your guests will be excited to get their hands on these DIY Ninja Staffs, perfect for some Ninja Birthday Party Games. Place a tape line on the ground and have ninjas take turns balancing on the line while they use a staff to try and knock their opponent off. To soften their blows, these Ninja Staffs are made from PVC pipe wrapped in foam tubing.
TO MAKE: For each Ninja Staff you will need a 3-foot piece of gray-colored, foam tubing insulation that fits half-inch tubing (found at the hardware store). Cut a length of three-quarter-inch PVC pipe to be two inches shorter than your gray foam piece. We cut the foam tubing with a pair of scissors and used an inexpensive pipe cutter tool that was simple to operate and created no mess. Slide the pipe inside the tubing insulation — it should fit very snugly so you may need an extra pair of hands to help push and pull the tubing around the pipe. Finish by wrapping string around the center of the staff to mimic the staff-wielding ninja on the party invitation.